MSD Dual Channel Tach Adapter for '00-04 Ford Focus with Zetec

In some instances when you install an MSD Ignition, the factory ECU may not be able to distinguish when the coil fires. This is the signal that is also responsible for firing the injectors (or the tachometer), which may cause a no-run situation. The Dual Channel Ignition Adapter simulates the original coil trigger signal thus allowing the ECU to properly trigger both the tach and fuel injection with the MSD DIS Ignition installed. In most cases, the Adapter plugs directly into the MSD Harness. For vehicles using an MSD DIS-2 Ignition, only one PN 8912 is required.

Price: $78.00
Buy Product Online | Visit Store Home

Manufactured by MSD Ignition

Other Items from Ignition Boxes, Tach Adapters, & Knock Control

  J&S UltraSafeguard Four Channel Unit for '03-07 Ford Focus 2.3L/2.0L Duratec -
  J&S 2 1/16" Dual Monitor (Knock Retard/Air-Fuel) for J&S UltraSafeguard -
  J&S 2 1/16" Knock Retard Monitor for J&S UltraSafeguard -
  Ford Knock Sensor Pigtail -
  Kenne Bell Boost-A-Spark for Vehicles with Supercharger / Turbo - Boost activation switch turns the unit on at 3psi
  MSD Dual Channel Tach Adapter for '00-04 Ford Focus with Zetec -
  Auto Meter Tach Adapter for '00-04 Ford Focus Zetec -
  MSD DIS Ignition Harness for '00-04 Focus Zetec/SVT -
  J&S UltraSafeguard Two Channel for Ford Focus '00-04 Ford Focus Zetec/SVT -
  MSD Digital DIS-4 Plus Ignition System for '03-07 Ford Focus with 2.0/2.3L Duratec - Two Tach Adapters are required for installation
  MSD Digital Rpm Window Switch -

Return To Central Florida Motorsports, Inc.- Focus Performance Parts & Accessories


E-commerce powered by MonsterCommerce shopping cart software.